Sick of the waterfall on the slide-out fridge coming from the end of the awning? My made-to-measure FRONT corner gutter will channel the water around the corner where it can harmlessly run down the front of the van. They are 3D printed from either PETG or ASA plastic, both of which are tough, durable and UV/temperature resistant. They are simply attached with silicon rubber (for example, Sikaflex). Please note that I usually have these in stock, but there maybe the odd occasion where I have to make them. Of course, this could add a couple of days on to the delivery.
Some customers have also requested a rear gutter. If you would also like to order this, please select from the options. NOTE: If you order the pair, then $10 discount will be applied at check-out.
I currently have black and white to choose from.
MDC Forte9+ Corner Gutter / Rainwater Diverter
Save $10 when buying front & back gutters together
Fitting Instructions
Refer to the two pictures on this page. Simply stick the gutters down with a generous layer of silicon sealant. Sealant will need to go between the underside gutter and the awning bag and also between the back side of the gutter and the side of the van. If the gutter is not staying in place, use some masking tape to hold it until the sealant sets.